Siemens SITRANS L Series Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Beralih Siemens SITRANS L Series. Siemens SITRANS L Series 50 halaman. Capacitance transmitters
Juga untuk Siemens SITRANS L Series: Petunjuk Pengoperasian yang Ringkas (45 halaman), Panduan Petunjuk Pengoperasian (33 halaman), Panduan Petunjuk Pengoperasian (44 halaman)

Installing/mounting

2.1

Process pressure

Improper installation may result in loss of process pressure.

Chemical resistance against the medium

Materials of construction are chosen based on their chemical compatibility (or inertness) for

general purposes. For exposure to specific environments, check with chemical compatibility

charts before installing.

Temperature range

The range of the ambient and process temperature of the device must be observed (see

Ambient Temperature (Page 39)and for Ex-approvals here). (Page 12)

Special conditions of use

Model 7ML5738 Extension tube is constructed using Industry Electrical conduit installed by

qualified personnel per equipment manual and NFPA 70 National Electrical Code (FM

Approved Unit).

Model 7ML5738 Extension tube is constructed using Industry Electrical conduit installed by

qualified personnel per equipment manual and CEC C22.1 Canadian Electrical Code.

Mechanical load

The torque at the fastening spot must not exceed 180 Nm (Pipe extension)/ 100 Nm

(Customer supplied pipe extension)

Maximum length "L" in dependence on the deviation (in degrees) from vertical installation

②

=Load

SITRANS LVS300

Operating Instructions, 05/2019, A5E44908583-AB

CAUTION

①