Siemens SITRANS LVL100 Panduan Petunjuk Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Beralih Siemens SITRANS LVL100. Siemens SITRANS LVL100 32 halaman. Vibrating switches
Juga untuk Siemens SITRANS LVL100: Panduan Petunjuk Pengoperasian (33 halaman), Panduan Petunjuk Pengoperasian (32 halaman), Panduan Petunjuk Pengoperasian (32 halaman)

Packaging

Transport

Transport inspection

Storage

temperature

SITRANS LVL100 l CONTACTLESS ELECTRONIC SWITCH

Data for power supply are speciﬁed in chapter "Technical

data".

3.3 Operation

The switching status of SITRANS LVL100 can be checked with

closed housing (signal lamp). Products with a density > 0.7 g/

cm³ (0.025 lbs/in³) can be detected.

3.4 Storage and transport

Your instrument was protected by packaging during transport.

Its capacity to handle normal loads during transport is assured

by a test according to DIN EN 24180.

The packaging of standard instruments consists of environ-

ment-friendly, recyclable cardboard. For special versions, PE

foam or PE foil is also used. Dispose of the packaging material

via specialised recycling companies.

Transport must be carried out under consideration of the notes

on the transport packaging. Nonobservance of these instruc-

tions can cause damage to the device.

The delivery must be checked for completeness and possible

transit damage immediately at receipt. Ascertained transit

damage or concealed defects must be appropriately dealt

with.

Up to the time of installation, the packages must be left closed

and stored according to the orientation and storage markings

on the outside.

Unless otherwise indicated, the packages must be stored only

under the following conditions:

Not in the open

Dry and dust free

Not exposed to corrosive media

Protected against solar radiation

Avoiding mechanical shock and vibration

Storage and transport temperature see "Supplement -

Technical data - Ambient conditions"

Relative humidity 20 ... 85 %

Product description