Siemens SF 25M855 Panduan Petunjuk Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin pencuci piring Siemens SF 25M855. Siemens SF 25M855 28 halaman.

Halaman Cetak

Water softening system

To ensure good washing results, the

dishwasher requires soft water, i.e.

containing low amounts of lime, otherwise

white limescale will be deposited on the

utensils and inner container.

Tap water above 9° Clarke must be

softened. The water is softened with salt

(regeneration salt) in the water softening

system of the dishwasher.

The setting and therefore the required

amount of salt depends on the degree of

hardness of your tap water (see table).

Water hardness table

:DWHU

+DUGQHVV

KDUGQHVV

UDQJH

YDOXH

&ODUNH

VRIW

PHGLXP

KDUG

PPROO

6HW YDOXHâRQâ

WKHâPDFKLQH

Setting

The amount of salt dispensed can be set

from

to .

Sal is not required at the set value .

– Find out about the hardness

value of your tap water. Your water

utility company will help you with this.

– Set value can be found in the water

hardness table.

– Close the door.

– Rotate the programme selector 8

from the 12 o'clock position anti-

clockwise by one notch.

– Switch on main switch ( and hold

down for at least 3 sec.

The current set hardness value is

indicated on the digital display `

and the salt refill indicator P flashes

(set hardness value was set to level

at the factory).

To change the setting:

– Rotate programme selector 8.

You can select a set value between

and

according

to the hardness of your water.

– Switch off the main switch (

The chosen setting has now been

stored.