Epson BrightLink 455Wi Mulai dari Sini Manual - Halaman 5

Jelajahi secara online atau unduh pdf Mulai dari Sini Manual untuk Proyektor Epson BrightLink 455Wi. Epson BrightLink 455Wi 6 halaman. Remote control information
Juga untuk Epson BrightLink 455Wi: Brosur & Spesifikasi (20 halaman), Panduan Pengoperasian (47 halaman), Panduan Pengguna (8 halaman), Panduan Pengguna (7 halaman), Buletin Dukungan Produk (5 halaman), Template Pemasangan (5 halaman), Panduan Pengguna (25 halaman), Brosur & Spesifikasi (6 halaman), Buku Panduan Instalasi (10 halaman)

Calibrate Your System

Calibration coordinates the positioning of the pen with

the location of your cursor. You can use either pen, and

you only have to calibrate once.

Do one of the following:

•

Windows: click the

tray on your taskbar (lower right corner of

your screen), then select Calibrate (Normal).

•

Mac OS X: click the

select Calibration from the menu bar at

the top of the screen, then select Calibrate

(Normal).

Note: If the pen icon appears with a red X

you won't be able to calibrate. Make sure the

projector is powered on and the USB cable is

connected to your computer.

After you read the following message, click OK.

Note: Advanced calibration is recommended

only if you are projecting highly detailed images.

pen icon in the system

pen icon in the Dock,

Wait a few moments for the ﬂ ashing green circle

to appear. Use the interactive pen to touch each

ﬂ ashing green circle as it appears. Continue until

all the circles stop ﬂ ashing and turn black.

•

Touch the center of each circle, and make

sure you are not casting a shadow on the

pen.

•

If you make a mistake, or if too many circles

appear at the same time, press Esc on your

computer keyboard and restart calibration.

Tip: You only need to recalibrate if you change

computers, or if you notice that the pen position

is no longer the same as your cursor.

Congratulations! When you ﬁ nish calibration, you're

ready to explore your software options, as described

on the next page.