Siemens SN Series Panduan Petunjuk Pengoperasian - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin pencuci piring Siemens SN Series. Siemens SN Series 46 halaman. Dishwasher
Juga untuk Siemens SN Series: Petunjuk Pengoperasian (38 halaman), Panduan Petunjuk Pengoperasian (38 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Panduan Petunjuk Pengoperasian (44 halaman), Panduan Petunjuk Pengoperasian (44 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Buku Petunjuk (48 halaman), Panduan Petunjuk Pengoperasian (40 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Panduan Petunjuk Pengoperasian (44 halaman), Panduan Petunjuk Pengoperasian (40 halaman)

Halaman Cetak
Siemens SN Series Panduan Petunjuk Pengoperasian
μ

HygienePlus *

This function increases the temperatures
and retains them for an extra long time
to obtain a defined disinfection
performance. Continuous use of this
function increases the hygiene status.
This additional option is ideal for
cleaning e.g. chopping boards and baby
bottles.
Ï

Intensive zone *

Perfect for a mixed load. You can wash
very soiled pots and pans in the lower
basket together with normally soiled
utensils in the upper basket. The spray
pressure in the lower basket is
intensified, the rinsing temperature is
increased slightly.
¿

Extra drying *

An increased temperature during the
final rinse and an extended drying
phase ensure that even plastic parts dry
better. There is a slight increase in the
energy consumption.
H y g i e n e P l u s
I n t e n s i v e z o n e
E x t r a d r y i n g

Operating the appliance

1
Operating
the appliance
O p e r a t in g th e a p p l ia n c e

Programme data

The programme data (consumption
values) can be found in the summary of
instructions. They refer to normal
value •:‹.... Different influencing factors
conditions and the water hardness set
such as e.g. water temperature or line
pressure may result in deviations.
A qua sensor *
A q u a s e n s o r
* depending on model
The Aqua sensor is an optical
measuring device (light barrier) which
measures the turbidity of the rinsing
water.
The Aqua sensor is used according to
the programme. If the Aqua sensor is
active, "clean" rinsing water can be
transferred to the next rinse bath and
water consumption can be reduced by
3–6 litres. If the turbidity is greater, the
water is drained and is replaced with
fresh water. In the automatic
programmes the temperature and
running time can also be adjusted to the
degree of soiling.
en
23