Epson BrightLink 455Wi Panduan Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Proyektor Epson BrightLink 455Wi. Epson BrightLink 455Wi 47 halaman. Remote control information
Juga untuk Epson BrightLink 455Wi: Brosur & Spesifikasi (20 halaman), Mulai dari Sini Manual (6 halaman), Panduan Pengguna (8 halaman), Panduan Pengguna (7 halaman), Buletin Dukungan Produk (5 halaman), Template Pemasangan (5 halaman), Panduan Pengguna (25 halaman), Brosur & Spesifikasi (6 halaman), Buku Panduan Instalasi (10 halaman)

Halaman Cetak
Epson BrightLink 455Wi Panduan Pengoperasian
Registering and deleting projectors for monitoring

Procedures for registration

Procedure
A
Select the projector to be registered from the displayed list,
and then click "Edit".
The following window will be displayed.
Make the necessary settings while referring to the following table.
Display name
Enter the name of the projector(s) to be
displayed in Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A
space cannot be used as the first character.
Display icon
Select the icon(s) to be displayed in Grouping
view or Detail list view.
Parent group
Select when registering a projector in a group.
If no groups have been created, this cannot be
selected.s "Registering several projectors to a
monitoring group all at once"
Projector
This shows the name that has been registered on
name
the projector.
IP address
This shows the IP address for the registered
projector.
Use Serial W
This cannot be selected when registering
TCP/IP
projectors using automatic search.
conversion
adaptor.
Port Number
This cannot be selected when registering
projectors using automatic search.
Monitor
If a Monitor Password has been set for the
Password
projector, be sure to enter the Monitor Password
that has been set. If the correct password is not
entered at this time, it will not be possible to
monitor and control the projector even though it
is registered.
Description
You can enter a memo about the projector. The
details you enter here will be displayed at the
projector properties.
Up to a maximum of 60 bytes can be entered.
Monitor
Select this when you want monitoring to start.
15
p.17