Epson BrightLink 475Wi Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Proyektor Epson BrightLink 475Wi. Epson BrightLink 475Wi 6 halaman. Lamp and status information
Juga untuk Epson BrightLink 475Wi: Mulai dari Sini Manual (6 halaman), Panduan Pengoperasian (47 halaman), Manual Koneksi (6 halaman), Panduan Instalasi (5 halaman), Template Pemasangan (5 halaman), Spesifikasi (6 halaman), Pernyataan Kesesuaian (4 halaman), Gambar Dimensi (3 halaman), Spesifikasi (6 halaman), Buku Panduan Instalasi (3 halaman), Buku Panduan Instalasi (2 halaman), Buku Panduan Instalasi (5 halaman), Mulai dari Sini Manual (6 halaman)

Epson BrightLink 475Wi Panduan Memulai Cepat
4
Use the Pens
Your projector came with 2 pens that have different
colored ends, orange and blue. Make sure one AA
battery is installed in each pen.
To turn on the pen, slide the power switch. The green
light comes on briefly. If the battery is low, the light
flashes.
Hold the pen perpendicular to the board, as shown
below.
To left-click, tap on the board.
To double-click, tap twice.
To right-click, press the board with the pen for
about 3 seconds.
To click and drag, tap and drag with the pen.
To move the cursor, hover over the board without
touching it.
When you are finished, slide the power switch to
turn off the pen.
Note: The pens turn off automatically after about 20
minutes of inactivity. Slide the switch to turn the pen
back on.
Battery light
Power switch

Choosing the Right Tool

If you already have annotation software, you can use
it with BrightLink. If you are using Microsoft
2003 or later, you can also use the "inking tools" to add
handwritten notes to your documents and PowerPoint
presentations.
Here are some tips on choosing among the tools that
came with your BrightLink projector:
Annotate on computer display
Annotate on white
background
Annotate on images from
document cameras or other
sources
Use both pens simultaneously
Save annotations
Annotate without a computer
Office
®
®