Epson BrightLink 480i Manual Koneksi - Halaman 6

Jelajahi secara online atau unduh pdf Manual Koneksi untuk Proyektor Epson BrightLink 480i. Epson BrightLink 480i 6 halaman. Lamp and status information
Juga untuk Epson BrightLink 480i: Mulai dari Sini Manual (6 halaman), Panduan Pengoperasian (47 halaman), Panduan Instalasi (5 halaman), Template Pemasangan (5 halaman), Spesifikasi (6 halaman), Pernyataan Kesesuaian (4 halaman), Buku Panduan Instalasi (3 halaman), Buku Panduan Instalasi (2 halaman), Buku Panduan Instalasi (5 halaman), Mulai dari Sini Manual (6 halaman)

Halaman Cetak

Audio Connections

A variety of audio connections are available:

■

You can connect a dynamic microphone to the

the projector.

■

You can also output computer audio. If you connected the computer using a VGA cable,

you need to connect an optional 3.5 mm stereo mini-jack audio cable for sound. If you

are using more than one audio connection, label the cables

■

If you connected the computer using an HDMI or Ethernet cable, you can output both

video and audio through the cable.

■

To enhance the sound from your presentation, you can connect the projector to external

speakers with built-in amplifiers. The volume can be controlled using the projector's

remote control.

If you want to output audio from the external speakers (or use the microphone) when the

projector is turned off, you need to adjust the

Extended menu. In standby mode, you can output only

composite audio (red and white RCA connectors).

Computer1 audio

connection

Computer2 audio

connection

Installing Software

You need to install software for use with the projector. Use the CD that came with the

projector, labeled

EPSON Projector Software for Easy Interactive Function.

■

For Macs, you need to install Easy Interactive Driver and Easy Interactive Tools. For

Windows, you only need Easy Interactive Tools.

■

For Linux, the pen will function as a mouse, but Easy Interactive Tools is not supported.

Third-party interactive software may be supported.

■

For projecting over a network on a PC or Mac, you also need to install the EasyMP

Network Projection software from the

All software is available at

Standby Setup

Microphone

RCA audio

connection

connections

Ethernet connection

(video and audio)

EPSON Projector Software

epson.com/brightlinkdownloads

port and output the sound through

Mic

Audio1

Audio2

settings in the projector's

Computer1

Computer2

External speaker

connection

HDMI connection

(video and audio)

CD.

audio or

CPD-37081