Siemens EC6..P SERIES Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kompor Siemens EC6..P SERIES. Siemens EC6..P SERIES 32 halaman.
Juga untuk Siemens EC6..P SERIES: Buku Petunjuk (45 halaman)

Halaman Cetak
Siemens EC6..P SERIES Buku Petunjuk

Your new appliance

Page 2 shows an overall view of your new appliance as well as
the burner power.

Accessories

Depending on the model, the hob may include the following
accessories. These can also be acquired from the Technical
Assistance Service.

Gas burners

There are indications to show which burner each control knob
operates.
6
Additional wok pan support
Only for use on wok burners
with pans with a round base.
Using these pans may cause
some temporary deformation
of the grease drip tray. This is
normal and does not affect
the operation of the appli-
ance.
Additional coffee maker
support
Only for use on the auxiliary
burner with pans which are no
more than 12 cm in diameter.
--------
Code
HZ298107
Additional wok pan support: cast iron (4-5 kW)
HZ298108
Additional wok pan support: cast iron (3.3 kW)
HZ298110
Additional wok pan support: steel enamel
HZ298114
Additional coffee maker support
HZ298105
Simmer Plate
HZ298104
Simmer Cap
The manufacturer accepts no liability if these accessories are
not used or are used incorrectly.
It is essential to ensure that all the burner parts and pan
supports are correctly installed for the appliance to work
correctly. Do not swap the burner caps around.

Switching on manually

Press the chosen burner control knob and turn it
1.
anticlockwise to the required setting.
Use any type of lighter or flame (cigarette lighter, matches,
2.
etc.) and bring it close to the burner.
Simmer Plate
This accessory has been
designed to reduce the level
of heat at the lowest power
setting.
Place the accessory directly
on the pan support with the
cones facing upwards, never
directly over the burner. Cen-
tre the pan over the acces-
sory.
Simmer Cap
Burner specially designed to
cook at minimum power. In
order to use it, remove the
auxiliary burner and replace it
with the Simmer Cap burner.