Cisco 7942G - Unified IP Phone VoIP Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Telepon IP Cisco 7942G - Unified IP Phone VoIP. Cisco 7942G - Unified IP Phone VoIP 11 halaman. Unified communications manager 9.0 (sccp and sip)
Juga untuk Cisco 7942G - Unified IP Phone VoIP: Panduan Pengguna (23 halaman), Lembar data (5 halaman), Panduan Instalasi (12 halaman), Panduan Pengguna (6 halaman), Panduan Pengguna (4 halaman), Panduan Administrasi (12 halaman), Panduan Pengguna (13 halaman), Panduan Pengguna (17 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (6 halaman), Panduan Administrasi (16 halaman), Pemecahan Masalah dan Pemeliharaan (27 halaman)

Unlock configuration:

1. Press the "settings" button.

2. Use the "navigation" button and navigate down to "Unlock Config".

3. Press the "Select" button.

4. Enter password (Default factory password is "cisco").

5. Press the "Accept" button to unlock configuration.

SIP Configuration

1. Use the "navigation" button and navigate up to "Network Configuration".

2. Press the "Select" button.

3. Navigate down to "TFTP server".

4. Press the "Select" button to edit TFTP value.

5. Enter details into TFTP value field.

6. Press accept button and reboot the Cisco 7942G.

- Conclusion: If everything is done as above described you should have successfully registered

your Cisco 7942G to PBXware. Dial

*123

to verify registration.

- For further information, please contact the manufacturer or check their web site

www.cisco.com.

Retrieved from "http://wiki.bicomsystems.com/Cisco_7942G"

Disclaimers - About Bicom Systems Wiki