Siemens ED HSC Series Informasi Untuk Penggunaan - Halaman 11

Jelajahi secara online atau unduh pdf Informasi Untuk Penggunaan untuk Kompor Siemens ED HSC Series. Siemens ED HSC Series 24 halaman.

Halaman Cetak
11.1 Switch-off timer
Allows you to programme a cooking time for one or
more cooking zones and their automatic switch-off
once the time set has elapsed.
Switching on Switch-off timer
Select the cooking zone and the power level.
1.
Press
⁠ .
2.
a
and 
light up.
Within the next 10 seconds, set the required cook-
3.
ing time in the settings area.
Touch
to confirm.
4.
a Once the cooking time has elapsed, the cooking
zone is switched off and a signal sounds.
Notes
¡ If a cooking time has been programmed in a cook-
ing zone in which the fryingSensor is activated, the
programmed cooking time will start to count down
as soon as the selected temperature level has been
reached.
¡ To switch the display between the operating temper-
ature fryingSensor and the programmed cooking
time, press the selected temperature.
12  powerBoost
The PowerBoost function enables you to heat up large
quantities of water faster than when using ⁠ .
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, ⁠   and  ⁠ flash on the display for
the selected cooking zone. ⁠   is then set automatically
without activating the function.
13  shortBoost
You can use this function to heat up pans more quickly
than with . Do not use the powerBoost function with
frying pans – this may damage the coating.
You can activate the function via Home Connect or Fa-
vourite button.
1
Available depending on software version. Further information on availability can be found on the website.
1
Changing or switching off Switch-off timer
Select the cooking zone and then touch
1.
To switch off the function, change the cooking time
2.
or set it to
⁠ .
11.2 Timer
Enables a clock to be activated. This function operates
independently of the cooking zones and other settings.
It does not automatically switch off the cooking zones.
Switching on Timer
Requirement: Assign the function to
Press
⁠ .
1.
Select the required time.
2.
a The time starts to elapse.
a A signal tone sounds and the displays flash once
the time has elapsed.
Changing or switching off the Timer
Press
⁠ .
1.
To switch off the function, change the cooking time
2.
or set it to
⁠ .
12.1 Switching on powerBoost
1.
Select the cooking zone.
Touch
2.
a The ⁠   display lights up.
a The function is activated.
12.2 Switching off powerBoost
Select the cooking zone.
1.
Touch
.
2.
a The ⁠   display goes out and the cooking zone
switches back to power level 
a The function is switched off.
Note: In certain circumstances, the appliance switches
this function off to protect the electronic elements in-
side the hob.
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, ⁠   and  flash on the display for
the selected cooking zone.
matically.
powerBoost en
⁠ .
⁠ .
then switches on auto-
11