Siemens EF6..EN Series Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kompor Siemens EF6..EN Series. Siemens EF6..EN Series 12 halaman.

Halaman Cetak
Locked hob
If you set a hotplate on a locked hob, the following occurs:
‹
flashes in the hotplate indicator, or the residual heat
■
indicator alternates with
The indicator lamp above the
■
Switch the hotplate off. Release the lock.

Automatic time limit

If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
hotplate indicator.

Control panel pause

If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a control panel
pause function. Touch the

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your needs.
Indicator
Function
Shortening the childproof lock switch-on time
™‚
Switched off.*
‹
‚
Switched on.
Audible signal
™ƒ
‹
Confirmation signal and operation error signal are switched off.
Only the operation error signal is switched on.
‚
ƒ
Confirmation signal and operation error signal are switched on.*
Activation of the filament circuits
™ˆ
‹
Switched off.
Switched on.
‚
ƒ
Last setting before the hotplate was switched off.*
Reset to basic setting
™‹
Switched off.
‹
Switched on.
‚
*Basic setting
‹
.
symbol lights up.
@
and
flash alternately in the
"
‰
symbol. A signal sounds. The
#

Shortening the switch-on time

You can shorten the switch-on time of the childproof lock from
4 seconds to 1 second.
You can find out how to shorten the switch-on time in the Basic
settings section.
Switch off the hotplate and then make your settings again.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
control panel is locked for 30 seconds. You can now wipe over
the control panel without altering any settings.
9