Siemens EF8 Series Buku Petunjuk - Halaman 8
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kompor Siemens EF8 Series. Siemens EF8 Series 12 halaman.
Halaman Cetak
Pause function
Activating the pause function
Tap the
symbol. The selected heat setting flashes on the
@
hotplate indicator. Heating is interrupted.
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
Switch the hotplate off.
Cleaning and care
The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for ceramic. Follow
the cleaning instructions on the packaging.
Never use:
Undiluted washing-up liquid
■
Detergent intended for dishwashers
■
Scouring agents
■
Rectifying faults
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
Indicator
Fault
Blank
There is no power supply.
Automatic time limit activated.
‹
is flashing
The controls are damp or an object is
is flashing
"
resting on them.
Display faulty.
"‹
Childproof lock faulty.
, all hotplates
"...
are switched off.
8
flashes in the hotplate indicator.
‹
Continuing cooking
Tap the
symbol again within 3 minutes. The hotplates
@
continue to heat.
Pause time exceeded
After 3 minutes, a
off and make your settings again.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Note: You can switch the hotplate back on again at any time.
Harsh cleaning agents such as oven spray or stain remover
■
Abrasive sponges
■
High-pressure cleaners or steam jet cleaners
■
Ground-in dirt can be best removed with a glass scraper,
available from retailers. Please note the manufacturer's
instructions.
You can also obtain a suitable glass scraper from our after-
sales service or from the e-Shop.
Hob surround
To prevent damage to the hob surround, please observe the
following instructions:
Use only warm, soapy water.
■
Do not use harsh or abrasive agents.
■
Do not use the glass scraper.
■
Action
Check the household fuse for the appliance. Check whether there is a
power cut by trying other electronic appliances.
Switch the hotplate off. Make your new settings.
Dry the controls or remove the object.
Switch the appliance off and back on again after about 30 seconds
using either the household fuse or the circuit breaker in the fuse box.
Contact the after-sales service if this appears in the display again.
Switch the appliance off and back on again after about 30 seconds
using either the household fuse or the circuit breaker in the fuse box.
Contact the after-sales service if this appears on the display again. You
can still cook with a faulty childproof lock.
flashes in the display. Switch the hotplate
‹