Siemens EH HEB Series Informasi Untuk Penggunaan - Halaman 14

Jelajahi secara online atau unduh pdf Informasi Untuk Penggunaan untuk Kompor Siemens EH HEB Series. Siemens EH HEB Series 24 halaman.

Halaman Cetak
en Home Connect
Touch the settings area.
3.
zones.
a The function is switched on.
a After 10 seconds, the result appears in the cooking
zone displays.
18.2 Checking the result
You can see what the result means for the quality and
speed of the cooking process in the following table.
Home Connect
19  Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Hobs are not designed to be left unattended. Al-
ways monitor the cooking process.
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
19.1 Setting up Home Connect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
Download the Home Connect app.
1.
Open the Home Connect app and scan the follow-
2.
ing QR code.
14
flashes in the cooking
Result
The cookware is not suitable for the cooking zone
and therefore does not heat up.
The cookware is taking longer to heat up than ex-
pected and cooking is not progressing as well as
it ought to.
The cookware is heating up correctly and cooking
is progressing well.
Note: If you have any unfavourable results, reposition
the cookware on a smaller cooking zone, if available.
To reactivate this function, touch the settings area.
Follow the instructions in the Home Connect app.
3.
19.2 Wi-Fi symbol
The Wi-Fi indicator on the main screen changes ac-
cording to the status and quality of the connection and
the availability of the Home Connect server.
status
Lights up steadily at half
brightness.
Flashes at full brightness.
Lights up steadily at full
brightness.
Flashes.
Switched off.
19.3 Adding or removing a Wi-Fi home
network
The following overview shows how to add or remove a
Wi-Fi home network.
Wi-Fi home network
status
No Wi-Fi home network
stored.
The Wi-Fi home network
has now been saved.
The Wi-Fi home network
has now been saved.
Description
No network connection
saved.
Network connection is be-
ing established.
Network connection
saved and Wi-Fi active.
Network settings are re-
set.
Network not active.
Action
To add the Wi-Fi home
network, briefly press
To pair another appliance,
press and hold
⁠ .
To reset the Wi-Fi home
network settings, press
and hold
. If
flashes,
press and hold
again.
⁠ .