Siemens EH6 MD2 Series Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kompor Siemens EH6 MD2 Series. Siemens EH6 MD2 Series 20 halaman.
Juga untuk Siemens EH6 MD2 Series: Buku Petunjuk (16 halaman)

Halaman Cetak

Control surfaces

Pressing a symbol activates its corresponding function.

Hotplates

Hotplate

Single hotplate

Double hotplate

Triple hotplate

Use only cookware suitable for induction cooking; see the section on suitable cookware.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching a hotplate that displays

this.

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Switching the hob on and off

The hob is turned on and off with the main switch.

To switch on: press the

main switch lights up. The hob is ready for use.

To switch off: press the

main switch disappears. All hotplates are off. The residual heat

indicator stays on until the hotplates have cooled down

completely.

Note: The hob switches off automatically when all the hotplates

are switched off for more than 20 seconds.

Setting the hotplate

The desired power level is set in the programming panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Turning on and off

Always use cookware of a suitable size.

This zone is switched on automatically when using cookware with a base the

same size as the outer zone.

The hotplate is switched on automatically by using a pan with a base that

matches the size of the outer area (

symbol. The indicator above the

symbol until the indicator above the

Notes

The settings will not change if several symbols are pressed at

■

the same time. This enables the programming zone to be

cleaned when food is spilt.

Always keep the control surfaces dry. Moisture can affect

■

proper functioning.

Even when switched off, the

the hotplate remains hot.

If the pan is removed before the hotplate is turned off the

indicators and the selected power level will appear alternately.

Selecting the power level

The range must be switched on.

Press the

symbol of the desired hotplate. The

symbols light up in the display.

Within the next 10 seconds, slide a finger on the

programming panel until the desired power level lights up.

Changing the power level: select the hotplate and set the

desired level using the programming panel.

Switch off the hotplate

Select the hotplate and set it to

The hotplate turns off and the residual heat indicator appears.

Notes

Upon selecting a hotplate the

■

then proceed to be adjusted.

If no pan has been placed on the induction hotplate, the

■

selected power level flashes. After a certain time has

elapsed, the hotplate switches off.

) selected for use.

light will remain on as long as

•

‹

in the programming panel.

symbol is displayed. It may

•

and