Cisco 8832 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Telepon IP Cisco 8832. Cisco 8832 2 halaman. Masergy ip conference phone
Juga untuk Cisco 8832: Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Manual (30 halaman), Panduan Instalasi (39 halaman), Panduan Memulai Cepat (16 halaman), Panduan Pemeliharaan (9 halaman), Mulai Cepat (2 halaman), Pengaturan (14 halaman), Panduan Konfigurasi Ulang (2 halaman), Mulai Cepat (2 halaman), Manual (30 halaman)

Halaman Cetak
Cisco 8832 Panduan Memulai Cepat
2
1
5
Your Phone
1
- Mute bar
- Wired microphone ports
2
3
- Softkey buttons
- Navigation bar an Select button
4
- Volume key
5
6
- LED bar
Cisco IP Phone 8832
LED Bar States
The LED bar illuminates to indicate status:
- Green, steady: Line ready
- Green, Flashing: Incoming Call
- Green, Pulsing: Held Call
- Amber, steady: Line not registered
- Red, steady: Line in use
Place a Call
Enter a number and press Call.
Answer a Call
Press Answer.
6
Put a Call on Hold
2
1. Press the Hold softkey button.
2. To resume a call from hold, press Hold
again.
3
Transfer a Call to Another Person
1. From a call that is not on hold, press
4
Transfer.
2. Enter the person's phone number.
3. Press Transfer again.
Add Another Person to a Call
1. from an active call, press Conf .
2. Enter a number.
3. Press Conf again to join the calls.
View Your Recent Calls
1. Press Select button.
2. Scroll and select Recents.
3. Select a line to view.
(All, Missed, Received, Placed)
Quick Start Guide