Cisco 8841 Panduan Referensi Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Telepon IP Cisco 8841. Cisco 8841 7 halaman. Mpp phones
Juga untuk Cisco 8841: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Referensi Cepat (6 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Mulai Cepat (2 halaman)

Halaman Cetak
Cisco 8841 Panduan Referensi Cepat
Blank Page
10
DoE— Ho'okele ES—6/2015
TO PLACE A CALL
Dial Tone — Lift Handset, or press the
ton,
Headset
button, or the
Pressing the
New Call
softkey activates the speaker if the speaker was
previously used or the headset if the headset was previously used
(headset icon displayed on top right of display).
Pre-Dial — Dial number you wish to call then lift Handset, press the
Speaker
button,
Headset
Internal Calls — Dial the 7-digit extension number.
External Calls — Dial 8 + telephone number
Local — 8 + 7-digit number
Inter-Island — 8 + 1 + 808 + 7-digit number
Long Distance — 8 + 1 + 10-digit number
Emergency Calls — Dial 911 or 8 + 911
To leave a message directly in a voicemail box (does not ring phone), dial
*
+ extension

ANSWER A CALL

1. While your phone is ringing, Lift Handset, press the
Line
button,
Headset

ANSWERING AN ADDITIONAL CALL

1. While on a call you will hear a call waiting beep indicating a new incoming
call.
2. Option 1: Press the flashing amber
first call on hold and answer the incoming call.
Option 2: Select the incoming call with your
press the
Answer
softkey.

PLACE A CALL ON HOLD

1. During a call, press the
Hold
2. To return to the held call, press the
3. If multiple calls are on hold, use the
then press the
Hold
button or
call.
Speaker
button,
Line
New Call
softkey then dial number.
button, or the
Call
softkey.
Speaker
button, or the
Answer
softkey.
button to automatically put the
Line
Button and
Navigation
button or
Hold
softkey.
Hold
button or
Resume
button to select a call
Navigation
Resume
softkey to return to the held
3
DoE— Ho'okele ES—6/2015
but-
button,
softkey.