Cisco 8841 Panduan Referensi Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Telepon IP Cisco 8841. Cisco 8841 6 halaman. Mpp phones
Juga untuk Cisco 8841: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Mulai Cepat (2 halaman)

Halaman Cetak
Cisco 8841 Panduan Referensi Cepat
CALNET 3: Cisco Hosted Collaboration Solution from AT&T: Quick reference guide

Call Waiting

Each line can handle up to four calls at a time. To
answer a call in waiting, press the corresponding line
button. This will place the initial call on hold.

Conference calling

To add a person to an existing call:
Press the Conference button.
Enter the number of the second person.
Press the Call soft key.
When they answer, press the Conference
button again.
Repeat these steps to add additional parties to
the conference all, for a total of 16 participants
(you plus 15 others).
To merge an active call with one on hold:
Press the Conference button.
Press Active calls soft key to select a held call.
Press Conference again.
To view a list of conference participants:
Press the Show details soft key.
The initiator's name will be marked with
an asterisk.
Press the Update soft key periodically to
update the screen status.
To remove a participant from the conference call:
The initiator can use the Navigation cluster to
highlight the person's name.
Press the Remove soft key.
Notes:
While on a conference call:
Pressing the Hold soft key will allow the other
parties to talk amongst themselves but they
cannot hear you.
The initiator can hang up and the other parties
will stay connected.
The initiator is the only person that can add or
remove participants from the conference.
© 2018 AT&T Intellectual Property. All rights reserved. AT&T and the Globe logo are registered trademarks of AT&T Intellectual Property.

Transferring a call

Transferring calls releases the call from your phone.
Call transfer:
Allows you to speak privately to the receiving party
before completing the transfer.
During an active call, press the Transfer button.
Enter the number of the receiving party.
Press the Transfer button again.
Call transfer directly to voicemail:
Allows you to transfer a call directly to your voicemail or
someone else's without ringing their phone.
During an active call, press the Transfer soft
key.
Press the asterisk followed by the extension
number.
Press the Transfer soft key to complete the
transfer.
Cancel call transfer:
Press the Cancel soft key before the transfer
completes.
Note: You do not need to place the call on hold before
transferring. During the transferring process, the caller
will automatically be put on hold and hear music.

Call forwarding

Enable call forwarding
Select a line and press the Forward all soft key.
Dial the number that you want to forward to.
To forward all calls to your mailbox, press the
Forward all soft key, then the Voicemail soft
key.
Notes:
"Call forwarded to" will be displayed on the
display.
Disable call forwarding
Press the Forward off soft key.
Cisco Unified IP phone 8841
Page 5