Cisco 8841 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8841. Cisco 8841 28 halaman. Mpp phones
Juga untuk Cisco 8841: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Referensi Cepat (6 halaman), Panduan Pengguna (24 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Mulai Cepat (2 halaman)

Your Phone

Before you begin

• Your administrator performs the necessary setup to allow you to monitor the concerned line.

• Your administrator allows configuring the BLF feature options on line keys.

• The line key on which you want to configure this feature is not configured as an extension.

Procedure

Step 1

Press and hold down the line key for two seconds.

Step 2

On the Select feature screen, select one of these options:

• If you just want to use the key to monitor a line, select BLF presence.

• If you want to use the key to monitor a line and also speed-dial the monitored line, select BLF + Speed

• If you want to use the key to monitor a line and also answer incoming calls to the monitored line, select

• If you want to use the key for all the three functions, select BLF + Speed dial + Call pickup.

Step 3

Enter the user ID of the person whose line you want to monitor, in the User ID field.

Note

If your administrator has configured a BLF list for you, you can select the user whose line you want to monitor

from the list:

a) Select Search BLF list.

Users whose names appear in grey in the list are ones that your phone is already monitoring on individually

configured BLF keys.

b) Select the user whose line you want to monitor.

The user ID appears in the User ID field.

If you select a user who is already monitored on an individually configured key, the new configuration

overrides the previous configuration to monitor the user.

Step 4

Press Save.

Remove the Feature Configured on a Line Key

You can remove the feature configured on a line key.

If your phone is monitoring a Busy Lamp Field (BLF) list, removing the feature configured on a line key

makes the line key available for monitoring the BLF list. This can change the positions of BLF list keys. See

Activate or Deactivate Monitoring of the BLF List, on page 11

dial.

BLF + Call pickup.

You must enter the user ID. The user ID may not be the person's name or extension. Consult your

administrator if you need assistance.

Remove the Feature Configured on a Line Key

for details.

Your Phone