Cisco 8841 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8841. Cisco 8841 28 halaman. Mpp phones
Juga untuk Cisco 8841: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Referensi Cepat (6 halaman), Panduan Pengguna (24 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Mulai Cepat (2 halaman)

Set a Password on Initial Phone Boot Up

Before you begin

Your administrator provides you with a 16-digit activation code in the form xxxx-xxxx-xxxx-xxxx.

Procedure

Step 1

Enter your activation code in the field that is provided on the Welcome screen. You don't need to input the

hyphen (-) character when entering the code.

Step 2

Press Continue.

The phone completes the onboarding process automatically.

Step 3

If an error message displays, enter the code again or contact your administrator for a new code.

Set a Password on Initial Phone Boot Up

The first time your phone boots up, you may be prompted to set a password. If you are not prompted, your

administrator has created a password for you.

Procedure

Step 1

Enter your password in the New password and Reenter new password fields.

Step 2

Press Save.

Secure the Phone with a Cable Lock

You can secure your Cisco IP Phone 8800 Series with a laptop cable lock up to 20 mm wide.

Procedure

Step 1

Take the looped end of the cable lock and wrap it around the object to which you want to secure your phone.

Step 2

Pass the lock through the looped end of the cable.

Step 3

Unlock the cable lock.

Step 4

Press and hold the locking button to align the locking teeth.

Step 5

Insert the cable lock into the lock slot of your phone and release the locking button.

Step 6

Lock the cable lock.

Your Phone