Cisco 8841 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8841. Cisco 8841 30 halaman. Mpp phones
Juga untuk Cisco 8841: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Referensi Cepat (6 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Mulai Cepat (2 halaman)

Step 2 Select Status > Phone Status > Phone Status.

You can view the following information:

• Elapsed time - Total time elapsed since the last reboot of the system

• Tx (Packets) - Transmitted packets from the phone.

• Rx (Packets) - Received packets from the phone.

View the Status Messages on the Phone

Procedure

Step 1 Press Applications

Step 2 Select Status > Status messages.

You can view a log of the various phone statuses since provisioning was last done.

Note

phone.

Step 3 Press Back.

View the Line Status

Procedure

Step 1 Press Applications

Step 2 Select Status > Phone status > Line status.

You can view the status of each line on the phone.

View the Transaction Status

Procedure

Step 1 Press Applications

Step 2 Select Network configuration > Ethernet configuration > 802.1X authentication > Transaction

status.

You can view the following information:

• Transaction status

• Protocol

View the Reboot History

Procedure

Step 1 Press Applications

Step 2 Select Status > Reboot history.

10 |

P a g e

Status messages reflect UTC time and are not affected by the time zone settings on the

Cisco IP Phone 8800 Series User Guide