Cisco 8841 Panduan Pengguna - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8841. Cisco 8841 40 halaman. Mpp phones
Juga untuk Cisco 8841: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Referensi Cepat (6 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (48 halaman), Mulai Cepat (2 halaman)

• You will hear a prompt saying, "Your anonymous call rejection service has been activated. All incoming

calls will be checked for number privacy before they are allowed to complete to your line".

Step 2 Dial *85 to disable Anonymous Call Block.

• You will hear a prompt saying, "Your anonymous call rejection service has been deactivated".

Enable/Disable Anonymous Call Block with Message

Anonymous caller will hear a message indicating anonymous callers are not allowed.

Step 1 Dial *95 to enable Anonymous Call Block with Message.

• You will hear a prompt saying, "Your anonymous call rejection service has been activated. All incoming

calls will be checked for number privacy before they are allowed to complete to your line".

Step 2 Dial *85 to disable Anonymous Call Block with Message.

• You will hear a prompt saying, "Your anonymous call rejection service has been deactivated".

Call Screening – All Callers

If you don't want to receive calls from anyone, you can use this feature and then enable only specific callers to

reach you (see

Step 1 Dial *64 to enable All Other Callers Block.

• You will hear a prompt saying, "Your selective call accept service has been activated".

Step 2 Dial *74 to disable All Other Callers Block.

• This will allow calls from everyone NOT specifically blocked.

• You will hear a prompt saying, "Your selective call accept service has been deactivated".

Call Screening – Custom Number

If you want to screen calls from a specific number, you can use the Custom Call Screening feature to control who

can call your phone and what happens when they do. This can be done via the online voice portal or star code.

Allow Custom Caller

If you have blocked all callers and want to allow a specific caller to contact you, use this feature.

Step 1 Dial *59

Step 2 Enter your voicemail PIN followed by #.

Step 3 Enter the number to be blocked followed by #.

• You will hear a prompt saying, "Calls from [phone number you entered] will be allowed".

Block Custom Caller

If you have allowed all callers and want to block a specific caller, use this feature. The caller will hear a busy signal

instead of reaching you.

19 |

P a g e

Procedure

Allow Custom

Caller).

Procedure

!"#$%&'(&()%*+&,,--&.+/"+#&0#+/&12"3+