Cisco 8841 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8841. Cisco 8841 40 halaman. Mpp phones
Juga untuk Cisco 8841: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Referensi Cepat (6 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman), Manual (48 halaman), Mulai Cepat (2 halaman)

Procedure

Step 1 Press Applications

Step 2 Select Accessibility > Voice Feedback.

Step 3 Select On to enable the feature.

Step 4 Select Exit twice to save your settings and return to Applications.

Adjust Voice Speed

You can customize the speed of Voice Feedback if it reads too quickly or too slowly. Voice Feedback must be enabled

before you can select a Voice Speed.

Procedure

Step 1 Press Applications

Step 2 Select Accessibility > Voice Speed.

Step 3 Press the Navigation cluster up and down to navigate. Press Select to choose a speed.

Step 4 Select Save twice to save your settings and return to Accessibility.

Step 5 Select Exit twice to return to Applications.

Monitor a Coworker's Line - Busy Lamp Field

With the busy lamp field feature, you can monitor the line status of a coworker or supervisor. This feature is useful

if you routinely handle calls for a colleague and need to see their ability to answer a call.

If this feature is configured on your phone, the following LED colors display on a line key:

• A green LED - Monitored line is available.

• A red LED - Monitored line is busy.

• A red fast blinking LED - A call is ringing to the monitored line.

• An amber LED - A configuration error occurred when this feature was being set up.

On your phone, you see the caller ID for the calls that you receive. For lines that you monitor, you do not see

caller ID.

You can use this feature with speed dial or call pickup for even greater flexibility. You may see different icons

displayed on your phone based on your combination of features. The following table shows the various busy lamp

field icons based on each feature combination.

Table 2: Busy Lamp Field Icons

Busy Lamp Field,

Speed Dial, and

Call Pickup

9 |

P a g e

Idle

Alerting

!"#$%&'(&()%*+&,,--&.+/"+#&0#+/&12"3+

In use

Error