Cisco 8851 Manual - Halaman 23

Jelajahi secara online atau unduh pdf Manual untuk Telepon IP Cisco 8851. Cisco 8851 48 halaman. Mpp
Juga untuk Cisco 8851: Catatan Rilis (24 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (24 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Manual (13 halaman), Manual (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Manual (5 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Pengguna (11 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Manual (22 halaman), Panduan Memulai Cepat (2 halaman), Memulai (2 halaman), Panduan Pengguna (40 halaman), Panduan Referensi Cepat (7 halaman), Mulai Cepat (2 halaman), Panduan Referensi Cepat (8 halaman)

Cisco IP Phone Accessories

Step 10

Use a screwdriver to fasten the screws into the phone and into each key expansion module.

This step ensures that the phone and key expansion modules remain connected at all times. This diagram

shows the location of the screw holes.

Note

Step 11

(Optional) Install the footstands on the phone and on the key expansion modules, and adjust all footstands to

rest evenly on the work surface.

Step 12

Plug the Ethernet cable into the phone.

Auto Detection of Key Expansion Modules

You can configure a new phone to auto-detect the maximum number of key expansion modules that it supports.

For these phones, the Number of Units field shows the maximum number of key expansion modules that the

phone supports as the default value. When a user adds key expansion modules to these phones, the module

lights up and is enabled automatically. Default value of this field is 2 for Cisco IP Phone 8851 and 3 for Cisco

IP Phone 8861. Navigate to Admin Login > Advanced > Voice > Att Console to check the value of the

Number of Units field.

If your user has an older release phone and it is upgraded to the current release, you can change the cofiguration

of the phone so that when the user adds a key expansion module to the phone, it lights up and is enabled

automatically.

Make sure that the screws are fully inserted into the phone and tightened.

Auto Detection of Key Expansion Modules

Cisco IP Phone Accessories