Cisco 8851 Panduan Referensi Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Telepon IP Cisco 8851. Cisco 8851 8 halaman. Mpp
Juga untuk Cisco 8851: Catatan Rilis (24 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (16 halaman), Panduan Referensi Cepat (7 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Cepat (2 halaman), Panduan Pengguna (24 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Manual (13 halaman), Manual (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Manual (5 halaman), Panduan Memulai Cepat (2 halaman), Panduan Singkat (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Pengguna (11 halaman), Panduan Memulai Cepat (2 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (6 halaman), Manual (22 halaman), Manual (22 halaman), Panduan Memulai Cepat (2 halaman), Memulai (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Panduan Referensi Cepat (7 halaman), Mulai Cepat (2 halaman)

Cisco 8851 MPP Quick Reference Guide

Call Pickup

If you are a member of a Call Pickup Group, you can answer a ringing phone of another colleague

within your Call Pick Up Group.

Redirect a call that is ringing on another phone within your Pick Up group:

1. Press the GrPickup soft key

Note: If more than one phone within the Pick Up group is ringing, you will pick up the phone that was

ringing first.

Chose which ringing phone within your Pick Up group that you want to redirect to your phone:

1. Press the Group Pick Up softkey

2. Enter the extension of the phone you want to redirect

3. Press the Call softkey

Note: Call Pick Up Groups will only be available if set up by your Group Administrator

To create an ad hoc conference call with up to 8 parties (you and up to 7 other parties)

While on a call

1. Press the Conference

2. Dial the next participant

3. Press the Conference

Repeat the instructions above to add other parties to your conference call

Set Forwarding on your desk phone to redirect incoming calls to an alternative number or your

voicemail.

To enable Forwarding to an alternate number:

1. Press the Forward softkey

2. Enter the destination number

A forward icon

and the destination number is displayed on your phone

To enable Forwarding to your voicemail:

3. Press the Forward softkey

4. Press the Voicemail button

A forward icon

and *62 is displayed on your phone

To disable Forwarding:

5. Press the Clr fwd softkey

Cisco 8851 MPP QRG

button or Conf softkey

button again or the Conf softkey to connect all parties

or dial *62

23/06/20