Cisco 8861 Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Telepon IP Cisco 8861. Cisco 8861 14 halaman. Calltower vpn enabled phone
Juga untuk Cisco 8861: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Manual (13 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Pengguna Cepat (2 halaman), Tembak Masalah (4 halaman), Panduan Cepat (3 halaman), Manual (22 halaman), Panduan Memulai Cepat (2 halaman), Memulai (2 halaman), Manual (48 halaman), Panduan Pengguna (40 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Mulai Cepat (2 halaman)

Add Buttons to Your Phone (8800 Series)

Caution

Step 5

Position the phone so that the front of the phone faces up.

Step 6

Connect one end of the key expansion module spine connector to the accessory connector on the Cisco IP

Phone.

a) Align the spine connector with the accessory connector ports.

Note

b) Firmly press the spine connector into the phone.

This diagram shows the spine connector.

This diagram shows the installation of the spine connector.

The slots are designed for the spine connector only. Insertion of other objects will cause permanent

damage to the phone.

Install the connector in the orientation shown in the following diagrams.

Connect a Key Expansion Module to a Cisco IP Phone

Add Buttons to Your Phone (8800 Series)