Cisco 8861 Manual - Halaman 39

Jelajahi secara online atau unduh pdf Manual untuk Telepon IP Cisco 8861. Cisco 8861 48 halaman. Calltower vpn enabled phone
Juga untuk Cisco 8861: Catatan Rilis (24 halaman), Panduan Pengguna (16 halaman), Fitur (16 halaman), Panduan Memulai dengan Cepat (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (29 halaman), Manual (44 halaman), Manual (13 halaman), Manual (14 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Pengguna Cepat (2 halaman), Tembak Masalah (4 halaman), Panduan Cepat (3 halaman), Manual (22 halaman), Panduan Memulai Cepat (2 halaman), Memulai (2 halaman), Panduan Pengguna (40 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Mulai Cepat (2 halaman)

Cisco IP Phone Accessories

Step 5

Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into

position.

Step 6

Proceed to

Remove the Phone from the Non-Lockable Wall Mount

The wall bracket has two tabs that lock the kit together. Use the following illustration to locate the tabs.

Figure 13: Tab Location

Before you begin

Obtain two Phillips head screwdrivers or other similar devices that have a diameter of 5 millimeters or 3/16ths

of an inch.

Procedure

Step 1

Insert a screw driver or other device into the left and right holes in the phone mounting plate. Insert to a depth

of about 3/4 of an inch or 2 centimeters.

Step 2

Press firmly inwards to disengage the tabs.

Adjust the Handset Rest, on page

Remove the Phone from the Non-Lockable Wall Mount

46.

Cisco IP Phone Accessories