Cisco 8865 Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Telepon IP Cisco 8865. Cisco 8865 2 halaman. Multiplatform phones
Juga untuk Cisco 8865: Fitur (16 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (28 halaman), Panduan Utama Migrasi Firmware (31 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (23 halaman), Manual (44 halaman), Manual (43 halaman), Manual (14 halaman), Panduan Instalasi (39 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (13 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (8 halaman), Manual (48 halaman), Manual (11 halaman), Panduan Pengguna (40 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Cisco 8865 Panduan Memulai Cepat
1
Your Phone
1
Incoming call or voicemail indicator
2
Camera (Cisco IP Phone 8845, 8865, and 8865NR)
3
Feature and session buttons
4
Softkeys
5
Back, Navigation cluster, and Release
6
Hold, Transfer, and Conference
7
Headset, Speakerphone, and Mute
8
Voicemail, Applications, and Directory
9
Volume
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Cisco IP Phone 8800 Series
9
8
Feature and Session Buttons
Use feature buttons (left side) to view calls on a line or
access features such as Speed Dial. Use session buttons
(right side) to perform tasks such as resuming a held call.
If you use a locale that reads right to left, the feature and
session button locations are swapped.
Buttons illuminate to indicate status:
Green, steady: Active call
x
Green, flashing: Held call
x
Amber, steady: Private line in use
x
Amber, flashing: Incoming call
x
Red, steady: Remote line in use
x
Red, flashing: Remote line on hold
x
Make a Call
2
Enter a number and pick up the handset.
Answer a Call
Press the flashing amber line button.
3
Put a Call on Hold
4
1. Press Hold
5
2. To resume a held call, press Hold again.
6
View Your Recent Calls
1. Press Applications
7
2. Select Recents.
3. Select a line to view.
Transfer a Call to Another Person
1. From a call that is not on hold, press Transfer
2. Enter the other person's phone number.
3. Press Transfer again.
Add Another Person to a Call
1. From a connected call that is not on hold, press
2. Press Active calls to select a held call.
3. Press Conference again.
Quick Start Guide
.
.
Conference
.
.
October 2016