Cisco 8945 Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco 8945. Cisco 8945 3 halaman. Unified ip standard phone
Juga untuk Cisco 8945: Lembar data (5 halaman), Panduan Pengguna (42 halaman), Catatan Rilis (16 halaman), Panduan Administrasi (16 halaman), Panduan Pengguna (24 halaman), Mulai Cepat (2 halaman), Panduan Memulai Cepat (4 halaman), Panduan Pengguna (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (8 halaman), Panduan Pengguna (2 halaman), Panduan Referensi Cepat (5 halaman), Referensi Cepat (2 halaman), Panduan Pengguna (2 halaman), Panduan Pelatihan (31 halaman), Panduan Fitur (4 halaman), Sekilas (3 halaman), Panduan Referensi (28 halaman), Panduan Pengguna (20 halaman), Memulai (29 halaman)

Halaman Cetak
Cisco 8945 Panduan Pengguna
Cisco 8945User Guide
Busy Lamp Field / Line Buttons
Amber
—Ringing call on this line
Green
—Active or held call on this line
Red
-Shared line in-use remotely
Application Button
Contacts Button
Voicemail Button
Transfer Button
Hold Key Button
Conference Button
Volume Toggle
Speaker Button
Mute Button
Headset Button
Navigation Button
& select key
1
Last Revised 7/12/2016 10:08 AM

Basic Call Handling

I
D
NTERNAL
IALING
Dial the 4 digit extension.
E
D
XTERNAL
IALING
Local: 9+1 Number
Domestic: 9+1 Area Code+Number
International: 9+011+Country Code+Number
Emergency External 9911
B
C
P
O
ASIC
ALL
LACING
PTIONS
Pick up the handset.
Press the Call or Redial icon.
Press the Speakerphone button.
Press a Speed Dial button.
A
C
NSWERING
ALLS
While idle:
Lift the handset
Press the speakerphone button
Press the amber flashing session button
H
/R
OLD
ESUME
While on an active call:
1.
Press the Hold key.
2.
Press the Resume softkey.

Call Waiting

During an Active call, if a second calls rings in
You will hear a single beep
To Answer (the original call will be put on hold
automatically)
Press the flashing amber line button
Or
Select the Answer softkey.
C
J
ALL
OIN
Start with two connected calls.
1.
Make sure that one of the calls is active (not on
hold). If both calls are on hold, resume one call.
2.
Press the Conference button
3.
Press the line button for the other (held) call.
.