Cisco Cisco 7940 Panduan Instalasi dan Konfigurasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Konfigurasi untuk Telepon IP Cisco Cisco 7940. Cisco Cisco 7940 10 halaman. 2 line appearance phone
Juga untuk Cisco Cisco 7940: Panduan Pengguna (19 halaman), Panduan Pengguna (13 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna yang Disesuaikan (2 halaman), Manual (35 halaman), Panduan Pengguna (15 halaman), Panduan Pengguna (23 halaman), Panduan Pengguna (14 halaman), Panduan Referensi (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (13 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (9 halaman), Panduan Referensi (4 halaman), Panduan Referensi Cepat (8 halaman), Panduan Memulai Cepat (12 halaman), Panduan Referensi Cepat (12 halaman), Panduan Pengguna (20 halaman), Panduan Pengguna (14 halaman), Panduan Referensi Cepat (12 halaman), Panduan Pengguna (6 halaman), Panduan Referensi (17 halaman), Panduan Pengguna (3 halaman), Panduan Pengguna Cepat (2 halaman), Panduan Instalasi Cepat (1 halaman), Manual (21 halaman), Panduan Pengguna (3 halaman), Referensi Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi (3 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna (4 halaman), Panduan Pengguna Cepat (2 halaman)

Ensure Cisco firmware and configuration files are present in the TFTP Server.

Navigate to .\Program Files\ADTRAN\NetVanta UC Server\Data\TFTP.

Ensure (at a minimum) that the following files are present:



If not present, perform the steps outlined in

Configuration on page

2. The Cisco phone does not download its configuration from the TFTP server after being

assigned an identity with the UC client.

Verify the following:

NetVanta TFTP service is running.

Select Start > Control Panel > Administrative Tools > Services.

Scroll down to NetVanta TFTP Server.

Ensure service is set to Automatic and is running.

Ensure Windows Firewall is not blocking the TFTP port.

Disable Windows Firewall.

Create an exception for the NetVanta TFTP Service program:

For example, C:\Program Files\ADTRAN\NetVanta UC

Server\Bin\TFTPService.exe.

Ensure that configuration files exist for the phone being provisioned.

Navigate to .\Program Files\ADTRAN\NetVanta UC Server\Data\TFTP.

Ensure (at a minimum) that the following files are present:

If not present, redo the steps outlined in

Configuration on page 1.

Ensure that the NetVanta UC Server Application Services service has full

permissions for the TFTP folder .\Program Files\ADTRAN\NetVanta UC

Server\Data\TFTP.

SIPDefault.cnf

template.cnf

SIPDefault.cnf

SIP<MAC>.cfg (where <MAC> is the MAC address of the phone being

provisioned)

Enabling Cisco SIP Phone