Cisco Cisco Access Registrar 4.2 Mengkonfigurasi Pengaturan Jaringan - Halaman 32
Jelajahi secara online atau unduh pdf Mengkonfigurasi Pengaturan Jaringan untuk Telepon IP Cisco Cisco Access Registrar 4.2. Cisco Cisco Access Registrar 4.2 34 halaman. Telepresence conference system
Juga untuk Cisco Cisco Access Registrar 4.2: Panduan Pengguna (44 halaman), Panduan Memulai (46 halaman)
Halaman Cetak
Configuring CDP
Assigning a Backup TFTP Server
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Configuring CDP
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-32
TFTP Server 2 displays the IP address of the backup TFTP server. This server is
used to obtain configuration files and software upgrades if the primary TFTP
server is unavailable.
Before you can assign a backup TFTP server, the Alternate TFTP setting must
be set to Yes.
To assign a backup TFTP server, follow these steps:
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to TFTP Server 2.
Press the Edit softkey.
Enter the new Alternative TFTP Server address.
For information about entering values, see the
the Network Configuration Menu" section on page
Press the Validat softkey.
Press Save.
You can disable or enable Cisco Discovery Protocol (CDP). CDP allows the phone
to be discovered by the CiscoWorks network management system.
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
"Guidelines for Editing Settings in
4-6.
OL-8617-01