Cisco Cisco Headset 561 Panduan Referensi Cepat

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Telepon IP Cisco Cisco Headset 561. Cisco Cisco Headset 561 2 halaman. Ip phones with multiplatform firmware
Juga untuk Cisco Cisco Headset 561: Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (46 halaman), Manual (40 halaman), Panduan Administrasi (48 halaman), Panduan Instalasi (39 halaman), Manual (24 halaman), Panduan Referensi Cepat (7 halaman)

Halaman Cetak
Cisco Cisco Headset 561 Panduan Referensi Cepat
Cisco Headset 561 and Cisco Headset 562 with Multibase
For Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, 8865, and 8865NR on Cisco Unified Communications Manager
High Sound Pressure—Avoid listening to high volume
levels for long periods to prevent possible hearing
damage.
When you plug in your headset, lower the volume of the headset
speaker before you put the headset on. If you remember to lower
the volume before you take the headset off, the volume will start
lower when you plug in your headset again.
Be aware of your surroundings. When you use your headset,
it may block out important external sounds, particularly in
emergencies or in noisy environments. Don't use the headset
while driving. Don't leave your headset or headset cables in an
area where people or pets can trip over them. Always supervise
children who are near your headset or headset cables.
Headset LED status indication
Incoming Call
Blinking red
Active Call
Steady red
White LED blinking every 4
Headset paired with dock
seconds
Headset and dock not paired
White LED blinking rapidly
Base LED status indication
LEDs show solid as
Headset battery strength
battery charges
LEDs blink in
System update
sequence left to right.
Headset and dock not paired
All LEDs blinking
Power/Call
Mute
Sources
Bluetooth
Volume +/-
Micro USB port
USB port
Bluetooth status indication
Bluetooth pairing
Bluetooth connected
Bluetooth on but not
connected to a device
Bluetooth off
Source call status
Selected source
Incoming Call
Active Call
Unselected source
with an active call
Muted

Quick Reference Guide

LED blinking
LED shows solid
LED pulsing
LED off
Steady White
Blinking green
Steady green
Pulsing green
Steady red