Cisco Cisco Headset 562 Panduan Pengguna - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco Cisco Headset 562. Cisco Cisco Headset 562 46 halaman. Ip phones with multiplatform firmware
Juga untuk Cisco Cisco Headset 562: Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (3 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Manual (40 halaman), Panduan Administrasi (48 halaman), Panduan Instalasi (39 halaman), Manual (24 halaman), Panduan Referensi Cepat (7 halaman)

Halaman Cetak
Cisco Cisco Headset 562 Panduan Pengguna
Calls
Step 3
Press Call.

End a Call and Answer an Incoming Call

Procedure
Step 1
Hold Call
Step 2
Press Call once.
End a Call and Resume a Held Call
Procedure
Step 1
Hold Call
Step 2
Select the call that you want to resume.
Step 3
Press Call once.
Wireless Headsets
Cisco Headset 561 and 562 with Standard Base and Cisco Headset 561 and 562 with Multibase use similar
call controls to the wired headset models with a few important differences. The call control buttons are located
on the headset ear cup and call status feedback is provided on the Standard Base and Multibase. See the
following section for specific call control functions.
Related Topics
Turn Your Headset On and Off
Procedure
Step 1
Hold Call
Step 2
Hold Call
• You can also place the headset on its base. The headset automatically turns on and syncs to the base.
until you hear a tone.
until you hear a tone.
Cisco Headset 560
Series, on page 4
on your headset for 4 seconds. You will hear a tone indicating headset status.
for another 4 seconds to turn the headset back on.
End a Call and Answer an Incoming Call
Cisco Headset 500 Series User Guide
17