Cisco IP 7960, SPA 501G Panduan Konfigurasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Telepon IP Cisco IP 7960, SPA 501G. Cisco IP 7960, SPA 501G 12 halaman. Spa300 and spa500 series ip phone with cisco unified communications uc320w
Juga untuk Cisco IP 7960, SPA 501G: Panduan Pengguna (18 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (7 halaman), Panduan Memulai Cepat (14 halaman), Kartu Referensi Cepat (2 halaman)

Step4. Save the settings and reboot the IP phone. After you save the

changes, system will prompt you to save the changes and reboot to save

changes without rebooting. Click OK to reboot the IP phone and provisioning the

phone.

Note:

The IP phone will reboot twice to apply the configuration take effect.

When done, you can see extension 500, 501, 503 have been registered on the

screen of Cisco IP phone.

Remark:

The factory default setting of DHCP for IP Phone is "enable", so you can skip this

step.

If the DHCP is disabled, please follow below step to enable it.

1) Login IP phone's web page.

Cisco IP Phone Configuration Guides

Figure 3-5

Figure 3-6

11/12