Cisco IP DECT 6825 Instalasi Perangkat Keras
Jelajahi secara online atau unduh pdf Instalasi Perangkat Keras untuk Telepon IP Cisco IP DECT 6825. Cisco IP DECT 6825 18 halaman. Masergy
Juga untuk Cisco IP DECT 6825: Panduan Pengguna (17 halaman), Panduan Pengguna (37 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (7 halaman)
Halaman Cetak
Hardware Installation
•
•
•
•
•
•
•
•
Installation Requirements
The Cisco IP DECT 6800 Series is made up of the following hardware:
• Cisco IP DECT Phone 6825 Handset
• Cisco IP DECT Phone 6825 Ruggedized Handset
• Cisco IP DECT 210 Multi-Cell Base Station
Before you begin to set up the Cisco IP DECT 6800 Series system:
• Determine the number of users (handsets) that are required.
• Determine the number of phone lines (numbers) that are required. Each user can have up to 2 lines and
• Given the number of handsets, determine the number of base stations required, based on:
Installation Requirements, on page 1
Install the Base Station, on page 5
Mount the Base Station on the Ceiling, on page 6
Mount the Base Station on a Desk, on page 9
Mount the Base Station on the Wall, on page 10
Install the Battery in the Handset, on page 13
Set Up the Charging Cradle, on page 16
Charge the Handset Battery, on page 17
2 concurrent calls.
• Estimated simultaneous handset usage
You can have up to 30 handsets registered on each base station. However, the number of active
calls the base station can handle is limited by the codec.
Hardware Installation
1