Cisco Linksys PAP2 Panduan Instalasi dan Pemecahan Masalah - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pemecahan Masalah untuk Telepon IP Cisco Linksys PAP2. Cisco Linksys PAP2 46 halaman. Cisco ip phone adapter with 2 ports for voice-over-ip installation and troubleshooting guide
Halaman Cetak
Action
Command
(press these
keys on the
telephone)
Check DHCP
100
Enable/Disable DHCP
101
Check IP Address
110
Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu
Using the Interactive Voice Response Menu
Interactive Voice Response Menu
Choices
Enter 1 to enable
Enter 0 to disable
Description
Use this command to find out if DHCP
has been enabled or disabled. If
enabled, the Phone Adapter will be
automatically assigned an IP address
by your network router or gateway. If
disabled, then the Phone Adapter will
use a static IP address.
Enable or disable the Phone Adapter's
DHCP feature. If your network router
or gateway assigns IP addresses, then
enter 1. Otherwise, enter 0.
You will hear the current IP address of
the Phone Adapter.
Phone Adapter with 2 Ports for Voice-over-IP
11