Ricoh Aficio 700 Panduan Petunjuk Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Semua dalam Satu Printer Ricoh Aficio 700. Ricoh Aficio 700 44 halaman. Sap printing
Juga untuk Ricoh Aficio 700: Manual (12 halaman)
Halaman Cetak
Connecting the Machine Using Network Interface Board Type
450-E
Connect the machine to the network using Network Interface Board Type 450-E.
Follow these steps to connect the machine.
A
Confirm that you have the correct cable.
B
Confirm that the machine is turned off.
C
Loop the network cable. The loop should be about 15cm (6") from the end
of the cable on the end closest to the printer.
D
Attach the ferrite core to the loop.
E
Attach the network cable to the 10BASE-T/100BASE-TX port on the ma-
chine.
Reference
See P.1 "Connecting the Machine" to confirm of the position of the 10BASE-
T/100BASE-TX port.
Note
Confirm that the cable is connected to the 10BASE-T/100BASE-TX port.
F
Connect the other end of the cable into the network.
Connecting the Machine
1
3