Cisco Small Business SPA525G2 Panduan Pengguna - Halaman 44

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon IP Cisco Small Business SPA525G2. Cisco Small Business SPA525G2 47 halaman. Vpn status
Juga untuk Cisco Small Business SPA525G2: Lembar data (6 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (8 halaman), Panduan Pengguna (22 halaman), Panduan Memulai Cepat (14 halaman), Panduan Konfigurasi (12 halaman), Panduan Konfigurasi (12 halaman), Panduan Memulai Cepat (21 halaman), Kartu Referensi Cepat (2 halaman), Panduan Memulai Cepat (8 halaman), Panduan Memulai Cepat (3 halaman), Panduan Memulai Cepat (3 halaman), Panduan Memulai Cepat (3 halaman), Panduan Memulai Cepat (4 halaman), Manual (3 halaman), Manual (3 halaman), Mengkonfigurasi (9 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Cisco Small Business SPA525G2 Panduan Pengguna

Viewing network information

1. Press the Setup button.
2. Scroll to 'Status' and press 'Select'.
3. Scroll to 'Network status' and press 'Select' - you'll then be able to see the following information:
o Network type
o Network status
o Addressing type
o IP address
o Subnet mask
o Default router
o Primary DNS
o Secondary DNS
o MAC (hardware) address

Viewing phone line and extension information

1. Press the Setup button
2. Scroll to 'Status' and press 'Select'
3. Scroll to 'Phone status' and press 'Select' - you'll then be able to see the following information:
o Phone status – up time and packets sent/received
o Extension status – this will tell you if an extension's been registered and when, plus lots
more
o Line status – active calls and call information
o Provisioning status – If a profile rule was used, and the status
o Call statistics history – this details information about individual calls

Viewing peripheral status

To see information about phone peripherals, like a USB memory stick or Cisco SPA attendant console:
1. Press the Setup button
2. Scroll to 'Status' and press 'Select'
3. Scroll to 'Peripheral status' and press 'Select' – you'll then be able to see the following information:
o USB status
o Attendant console (Attn Cons) status
Version 1.5
44 of 47