Ricoh Aficio CL3000 Manual Opsi - Halaman 26
Jelajahi secara online atau unduh pdf Manual Opsi untuk Printer Ricoh Aficio CL3000. Ricoh Aficio CL3000 48 halaman. Sap printing
Juga untuk Ricoh Aficio CL3000: Manual (49 halaman), Instal Manual (3 halaman), Panduan Instalasi Cepat (4 halaman), Panduan Tambahan (3 halaman), Manual Suplemen (38 halaman), Manual (12 halaman)
![Ricoh Aficio CL3000 Manual Opsi](/uploads/products/server2/5361052/5361052.png)
Options
Connecting the cable to the
1394 Interface Unit
A A A A
1
Connect the interface cable to the
1394 interface port.
Note
❒ Either connector can be used.
❒ If you use a interface cable (6
pins x 6 pins) connect the end
with the ferrite core to the print-
er.
B B B B
Connect the other end to the host
computer.
Important
❒ You cannot plug devices togeth-
er to create loops.
❒ Do not use a cable more than 4.5
meters (14.8 feet) long.
22
IEEE 1394 Configuration
Use this procedure to configure the
printer for use in the IEEE 1394 envi-
ronment. The following table shows
the control panel settings and their
default values. These items are in-
cluded in the "Host Interface" menu.
Setting Name
IP Address1394
Subnet Mask1394
IP over 1394
SCSI print
Bidi-SCSI print
ZHBP090E
Depending on the protocol you use,
procedures vary. See the following ta-
ble.
IP over 1394
SCSI print
A A A A
Press { { { { Menu} } } } .
"Menu" appears on the panel dis-
play.
B B B B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Host
Interface" menu.
Menu:
Host Interface
Value
000.000.000.000
000.000.000.000
Active
Active
Active
Steps A-H and then
go to steps M to N
Steps A-D and then
go to steps I to N
ZHBS010E