Ricoh Aficio MP 8000 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Ricoh Aficio MP 8000. Ricoh Aficio MP 8000 41 halaman. Sap printing
Juga untuk Ricoh Aficio MP 8000: Brosur & Spesifikasi (6 halaman), Panduan Memulai Cepat (19 halaman), Panduan Memulai Cepat (45 halaman), Panduan Pemecahan Masalah (23 halaman), Manual (12 halaman)

PaperCut – Ricoh Embedded Manual

copier functions should be disabled and the following screen should display:

2.2.7 Increase Extended Feature Settings Heap / Stack size

We recommend increasing the heap-size setting to the maximum available. To do this:

1. Go to the device's Web Interface , navigate to Device Management->Configuration

2. Select Administrator Tools

3. Under Heap / Stack Size Settings set the Heap Size to the maximum value allowed

by the device (see screenshot below)

To overcome some limitations with the way the Ricoh devices notifies embedded

applications of fax events it is recommended to change the fax transmission mode to

"Immediate TX". This changes fax to only scan documents as they are sent, improving the

reliability of fax logging.

To do this:



At the device LCD press the "Facsimile" button



Press the "Immed. TX" button so that it is highlighted. This button appears toward

the centre right of the Fax screen.



Press the "Program" hard key (above numeric keypad).



Press the "Program as Defaults" button on the screen.



Press the "Program" button on the screen.



Press "Yes" to confirm.

This sets the "Immediate TX" mode as the default transmission mode for all Faxing.

See section 6.1.1 "Fax Tracking Limitations" for information.

Revision: 19

2012-10-26

10 of 41