Ricoh \sp 213FNw Setup Manual - Halaman 7
Jelajahi secara online atau unduh pdf Setup Manual untuk Printer Ricoh \sp 213FNw. Ricoh \sp 213FNw 24 halaman.
Halaman Cetak
2. Installing the Software
Checking the available connection
•
USB
To install the software over a USB connection, a USB cable and the supplied CD-ROM
are required.
•
Ethernet
•
To install the software over a network connection, a network cable and the supplied
CD-ROM are required.
•
To automatically obtain the IP address, a router with a built-in DHCP server is required.
•
Ethernet and wireless LAN settings cannot be enabled at the same time.
•
Wi-Fi
•
To connect to the network via wireless LAN, see Wi-Fi Settings Guide.
•
To automatically obtain the IP address, a router with a built-in DHCP server is required.
•
Ethernet and wireless LAN settings cannot be enabled at the same time.
•
If WPS cannot be used with SP 213Nw, first connect the machine and computer via a
USB cable, install Smart Organizing Monitor only, and then configure the Wi-Fi settings.
Next, connect the machine to the network, and then install the printer driver only.
7