Cisco Unified 6921 Setup Manual - Halaman 5

Jelajahi secara online atau unduh pdf Setup Manual untuk Telepon IP Cisco Unified 6921. Cisco Unified 6921 16 halaman. Cisco systems telephone
Juga untuk Cisco Unified 6921: Lembar data (5 halaman), Catatan Rilis (18 halaman), Lembar data (5 halaman), Panduan Pengguna (38 halaman), Panduan Administrasi (14 halaman), Fitur (29 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (17 halaman), Mulai Cepat (2 halaman), Panduan Memulai Cepat (7 halaman), Panduan Referensi Cepat (7 halaman), Instalasi Cepat & Panduan Pengguna (12 halaman), Panduan Referensi (4 halaman), Kartu Referensi Cepat (2 halaman), Panduan Administrasi (19 halaman), Panduan Pengguna (19 halaman), Panduan Pengguna Cepat (7 halaman), Panduan Instalasi Cepat (12 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), (Bahasa Portugis) Panduan Memulai Cepat (2 halaman), (Bahasa Portugis) Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Cisco Unified 6921 Setup Manual
Chapter

Installing the Cisco Unified IP Phone

You must connect the Cisco Unified IP Phone to the network and to a power source before using it. See
Figure 3-1
connections for a Cisco Unified IP Phone 6945, and
Unified IP Phone 6961.
Before you install a phone, even if it is new, upgrade the phone to the current firmware image. Before
Note
using external devices, read the
performance information.
To install a Cisco Unified IP Phone, perform the tasks described in
Table 3-1
Installing the Cisco Unified IP Phone 6921, 6941, 6945, and 6961
Task
Purpose
Connect the handset to the Handset port.
1.
Connect a headset to the Headset port.
2.
Optional. You can add a headset later if you do not
connect one now.
Optional. Connect the power supply to the Cisco DC
3.
Adapter port.
Connect a straight-through Ethernet cable from the
4.
switch to the network port labeled Network on the
Cisco Unified IP Phone 6921, 6941, 6945, and 6961.
Each Cisco Unified IP Phone ships with one Ethernet
cable in the box.
You can use either Category 3/5/5e cabling for
10-Mbps connections, but you must use Category 5/5e
for 100 Mbps connections.
Connect a straight-through Ethernet cable from
5.
another network device, such as a desktop computer,
to the access port labeled Computer on the
Cisco Unified IP Phone 6921, 6941, 6945, and 6961.
Optional. You can connect another network device
later if you do not connect one now.
You can use either Category 3/5/5e cabling for
10-Mbps connections, but you must use Category 5/5e
for 100 Mbps connections.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
shows the connections for Cisco Unified IP Phones 6921 and 6941,
"Using External Devices" section on page 3-4
Installing the Cisco Unified IP Phone
Figure 3-2
shows the connections for a Cisco
Table
Related Topics
—
See the
"Headset" section on page 3-3
headsets.
See the
"Adding Phones to the Cisco Unified CM
Database" section on page 2-8
See the
"Network and Access Ports" section on page 3-2
for guidelines.
See the
"Network and Access Ports" section on page 3-2
for guidelines.
Figure 3-3
shows the
for safety and
3-1.
for supported
for guidelines.
3-5