Ricoh P3000 Panduan Memulai Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Printer Ricoh P3000. Ricoh P3000 8 halaman. Unified communicatio system
Juga untuk Ricoh P3000: Panduan Cepat (2 halaman), Buletin Teknis (11 halaman)
Halaman Cetak
6. To Accept a Request from the Device
6. To Accept a Request from the Device
You can also accept the registration request from the 'Menu' on the P3000 device by clicking on the
You can also accept the registration request from the 'Menu' on the P3000 device by clicking on the
You can also accept the registration request from the 'Menu' on the P3000 device by clicking on the
Registration Request List.
7. Device Setup and Network Configuration
7. Device Setup and Network Configuration
1. Connect the AC Adapter Power cable to the P3000
AC Adapter Power cable to the P3000
and plug into AC outlet.
2. Connect an Ethernet cable to the P3000, and
2. Connect an Ethernet cable to the P3000, and
connect to a Wired LAN router or Hub. A wireless
connect to a Wired LAN router or Hub. A wireless
LAN connection is also available
3. Connect your P3000 to a display device such as
3. Connect your P3000 to a display device such as
projector or PC monitor.
4.Turn the P3000 on. A blue power light will appear.
4.Turn the P3000 on. A blue power light will appear.
5. Click the "Menu" button.
6. Go to "Wired Network Configuration" or "Wireless
6. Go to "Wired Network Configuration" or "Wireless
Network Configuration",
Network Configuration",
settings to configure the P3000.
8. Firmware Update
If there is an updated version of firmware, the message will show up in "Firmware Update"
If there is an updated version of firmware, the message will show up in "Firmware Update"
If there is an updated version of firmware, the message will show up in "Firmware Update" in "Menu".
Click the button and proceed with firmware update.
Click the button and proceed with firmware update.
and select appropriate
and select appropriate