Cisco Unified 7905G Mengkonfigurasi Pengaturan Jaringan - Halaman 15

Jelajahi secara online atau unduh pdf Mengkonfigurasi Pengaturan Jaringan untuk Telepon IP Cisco Unified 7905G. Cisco Unified 7905G 34 halaman. Ip talk series
Juga untuk Cisco Unified 7905G: Panduan Pengguna (21 halaman), Lembar data (5 halaman), Panduan Pengguna (25 halaman), Panduan Telepon (46 halaman), Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Referensi (20 halaman)

Chapter 4

Configuring Network Settings on the Cisco Unified IP Phone

Disabling DHCP

Note

Using the Phone Configuration Web Page

Step 2

Step 3

Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone

OL-8617-01

If you do not use DHCP in your network, use this procedure to disable DHCP

before manually assigning IP addresses to Cisco Unified IP Phones.

Procedures involved in configuring IP settings or TFTP options cannot be

completed when DHCP is enabled in your network.

To disable DHCP for the Cisco Unified IP Phone, follow these steps:

Procedure

Display the Phone Configuration web page.

For instructions, see the

Configuration Web Page" section on page

In the pane on the left under Change Configuration, click Network Parameters.

You may be prompted to enter a password.

The Network Parameters web page appears.

To disable DHCP, enter 0 in the DHCP field and click Apply.

"Accessing Network Settings through a Phone

4-2.

Modifying DHCP Settings

4-15