Cisco Unified 7905G Mengkonfigurasi Pengaturan Jaringan - Halaman 33

Jelajahi secara online atau unduh pdf Mengkonfigurasi Pengaturan Jaringan untuk Telepon IP Cisco Unified 7905G. Cisco Unified 7905G 34 halaman. Ip talk series
Juga untuk Cisco Unified 7905G: Panduan Pengguna (21 halaman), Lembar data (5 halaman), Panduan Pengguna (25 halaman), Panduan Telepon (46 halaman), Referensi Cepat (2 halaman), Panduan Pengguna (20 halaman), Panduan Referensi (20 halaman)

Cisco Unified 7905G Mengkonfigurasi Pengaturan Jaringan
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Using the Phone Configuration Web Page
Step 1
Step 2
Step 3
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
For more information about CiscoWorks, refer to the documentation available at
this URL:
http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/index.htm
To configure CDP for the Cisco Unified IP Phone, follow these steps:
Procedure
Display the Phone Configuration web page.
For instructions, see the
Configuration Web Page" section on page
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
In the OpFlags field,
To enable CDP, change bit 6 to a zero (0).
a.
To disable CDP, change bit 6 to a 1.
b.
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to CDP Enabled.
If CDP is enabled, the option appears as
"Accessing Network Settings through a Phone
4-2.
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
Configuring CDP
4-33