Ricoh Ri 1000 Panduan Pemeliharaan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pemeliharaan Pengguna untuk Printer Ricoh Ri 1000. Ricoh Ri 1000 7 halaman. Procedure for long-term storage
Juga untuk Ricoh Ri 1000: Panduan Pemecahan Masalah (27 halaman), Panduan Pengguna (9 halaman), Manual (22 halaman)
Halaman Cetak
5-1
Error example 1
When CR
encoder error
(JAM) occurs
5-2
Error example 2
When the ink
cartridge ends,
Or, Ink cartridge
not inserted
5-3
Error example 3
When the waste
ink bottle is full
5-4
Error example 4
Cover open
Do not leave the head positioned anywhere other than on
the maintenance unit. It may cause head nozzle clogging.
If the carriage unit gets stuck on the media on the table,
follow the steps below to recover.
(1) Remove the media.
(2) Press "CAP IN" displayed on the operation panel. The
carriage unit returns to the maintenance unit.
(3) Turn off and on the power and, restart.
Do not leave the ink cartridge in the end state. Also, do not
leave the ink cartridge removed.
It may cause the ink pump to malfunction or the head
nozzle clogging. Replace it with a new ink cartridge as
soon as possible and check that it is in the "Ready" state.
Make sure you have spare inks available before you run
low.
＜Ink cartridge ends state＞
＜Ink cartridge not inserted＞
Do not leave the waste liquid bottle full.
Since the automatic maintenance operation does not
operate, it may cause the head nozzle clogging.
Do not leave the cover open.
Since the automatic maintenance operation does not
operate, it may cause the head nozzle clogging.
＜Cover open state＞
RICOH Ri 1000
User Maintenance Precautions
―
―
―
―