Ricoh Savin CLP128 Panduan Dukungan Produk - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Dukungan Produk untuk Printer Ricoh Savin CLP128. Ricoh Savin CLP128 25 halaman. Product guide

G130/G131 Product Support Guide

The diagram on the below is a graph made from the data in the above table.

As explained on the previous page, the yield of the PM parts depends on the number of rotations

for a page. (This system for assessing yield is common in the printer field.) The expected yield of

all PM parts is calculated under a specific condition (3P/J, A4/LT long-edge feed, and 5% image

coverage ratio). P/J particularly affects the unit yield.

100.0

80.0

60.0

40.0

20.0

0.0

Note: Machine works for making patterns in process control self-check and lines

position adjustment (MUSIC) or performs idling when turning on the main switch.

While the machine is in these modes (self-check, MUSIC, and idling), the yield

counter (rotation counter) of maintenance kits counts up without making outputs.

Performing self-check, MUSIC or power OFF/ON of machine excessively affects the

unit yield

If making a meter charge contract with customers and if the meter charge fee is always the same

for all users, this may cause a reduction in profits depending on how a customer makes prints.

Therefore, it is recommended to consider the expected P/J and print volume for each user when

making a service contract.

Version – 1.0

PM Inerval (P/J)

P/ J

PCU(Bk)

PCU(FC)

Dev(Bk)

Dev(FC)

Fusing