Ricoh SP 213w Setup Manual - Halaman 21

Jelajahi secara online atau unduh pdf Setup Manual untuk Printer Ricoh SP 213w. Ricoh SP 213w 25 halaman.
Juga untuk Ricoh SP 213w: Setup Manual (24 halaman), Setup Manual (24 halaman), Setup Manual (24 halaman), Setup Manual (24 halaman), Setup Manual (24 halaman), Setup Manual (24 halaman)

Ricoh SP 213w Setup Manual

Configuring the IP Address Settings Using the Web Image Monitor

Starting Web Image Monitor

Launch the Web browser.
In the address bar, enter "http://(machine's IP address)/".
IPv4 Address
Enter the IP address shown on the configuration page.
Use a computer using the IP address shown on the configuration page with its variable part modified.
IPv6 Address
Enter the IP address shown in "Link-local Address" on the configuration page. Enclose the IP address in
square brackets, thus: "http:/[fe80:226:73ff:fe47:62e]/".
Configuring the Machine's IPv4 Address Automatically
Launch Web Image Monitor.
Click [Network Status].
Set [DHCP] to [Active].
For details about configuring the IPv6 address, see the User Guide
Configuring the Machine's IPv4 Address Manually
Launch Web Image Monitor.
Click [Network Status].
Set [DHCP] to [Inactive].
Specify the IP address in [IP Address].
Specify the subnet mask and default gateway address as required in accordance with the network environ‑
ment.
Specify other settings if necessary.
Enter the administrator password if required.
Click [OK].
For details about configuring the IPv6 address, see the User Guide
DCT060
.
DCT061
.
21