Ricoh SP3 Buletin Teknis - Halaman 3

Jelajahi secara online atau unduh pdf Buletin Teknis untuk Printer Ricoh SP3. Ricoh SP3 28 halaman.

Model:

Finisher for SP3

Subject:

SC101

From:

QAC 2nd Field Information Dept.

Classification:

For the machines on which the Finisher is installed, if a large amount of copies is made

right after power-up, SC101 may occur. If SC101 occurs, please replace the Entrance

Guide with part number A6122333. The installation procedure for the Entrance Guide is

shown on the next page.

Symptom

SC101 occurs.

Cause

If the Entrance Guide is not installed in the proper position, a gap may develop between

the Cover and the Main Frame through which the heat and humidity generated by the

paper may enter and lead to high temperature/high humidity around the lamp stabilizer.

Countermeasure

MB#8 and MB#9 for the SR700 provide information concerning the change in shape of the

Entrance Guide. Please refer to these MBs for further details concerning this modification.

ACTION

During the set-up of a Finisher manufactured after May 1997, please install the Entrance

Guide in a manner that will prevent a gap from developing between the Cover and the

Main Frame. Please refer to the attached page for this procedure.

In the event of an SC101 on a Finisher manufactured before April 1997, please replace the

Entrance Guide with part number A6122333.

echnical

Troubleshooting

Mechanical

Paper path

Other (

)

ulletin

Date:

30-Sep-97

Prepared by:

Part information

Electrical

Transmit/receive

PAGE: 1/2

No:

E.Fukuyama

Action required

Service manual revision

Retrofit information