Ricoh StreamPunch Pro Panduan Pengoperasian & Instruksi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengoperasian & Instruksi untuk Printer Ricoh StreamPunch Pro. Ricoh StreamPunch Pro 32 halaman.
![Ricoh StreamPunch Pro Panduan Pengoperasian & Instruksi](/uploads/products/server2/5372631/5372631.png)
Safety messages
MAIN CORDSET SELECTION
(THE FOLLOWING NOTE ONLY APPLIES TO THE UNITS RATED
230V 50/60HZ, AND LOCATED IN THE EUROPEAN UNION)
CAUTION: WHEN CHOOSING A DETACHABLE LINE CORD
FOR USE WITH YOUR STREAMPUNCH, ALWAYS
FOLLOW THE FOLLOWING PRECAUTIONS
The cordset consists of three parts: the attachment plug, the cord and
the appliance inlet. Each of these components must have European
regulatory safety approvals.
The following minimum electrical ratings for the specific cordset are
published for safety purposes.
DO NOT USE CORDSETS THAT DO NOT MEET THE FOLLOWING
MINIMUM ELECTRICAL REQUIREMENTS.
PLUG: 3 amperes, 250 volts, 50/60 Hz, Class 1, 3 conductor, European
safety approved.
CORD: Type H05VV-F3G0.75, Harmonized (< HAR>). The "< >" symbols
indicate cord approved according to appropriate European standard (NOTE:
"HAR" may be substituted for approval mark of European safety agency that
approved the cord. An example would be "< VDE >").
APPLIANCE CONNECTOR: 3 amperes, 250 volts, 50/60 Hz, European
safety approved, Type IEC 320. The cordset shall not exceed 3 meters in
length. A cordset with component electrical ratings greater than the
minimum specified electrical ratings may be substituted.
Service
Do not attempt to service your StreamPunch yourself. Contact an
authorized service representative for any required repairs or major
maintenance for your StreamPunch.
DO NOT REMOVE THE MACHINE'S COVER.
There are NO user-serviceable parts inside the machine in order to avoid
potential personal injury and/or damage to property or the machine itself.
4
StreamPunch
Safety
The following symbols appear on this product:
Paper Jam
Chip Tray Full/Out
Punch Enabled
PAPER JAM: Indicates there is a paper jam.
CHIP TRAY FULL/OUT: Indicates the chip tray should be emptied, is
missing, or not properly installed.
PUNCH ENABLED: Indicates the system is in the punch mode.
CHECK DIE SET: Indicates a Die Set is not installed properly.
CLOSE DOOR: Indicates the access door is not properly closed.
POWER: Indicates the machine is plugged in, the POWER is on.
These instructions have been prepared to familiarize you with the
StreamPunch and it's operation. Please read them carefully and store
this complete set of operation instructions for future reference.
2. INTRODUCTION
Thank you for purchasing the StreamPunch. It is a versatile production
system that will enable you to punch documents for a variety of binding
styles by means of a simple die change. It has also been designed for
easy operation.
The StreamPunch is an innovative solution for punching paper and
offers the following design features:
Quick-change die sets that are self-latching without tools or levers.
All StreamPunch die sets include an Identification Label providing
the user with the hole pattern and name.
Convenient storage area for three extra Die Sets located above the
sheet bypass.
Pro, Pro EX & MP
TM
Check Die Set
Close Door
Power
GB